φ500/φ630/φ800 系列大型外圆磨床

φ500/φ630/φ800Series Large Cylindrical Grinding Machine Tool

M1350 M1450

数控立式磨床报价_优质磨床

M1363 M1463

M1380

¾ 机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用高刚性套筒式动静压轴承轴系，回转精度高，精度保持时间长。

Spindle of the wheel head uses the by high rigidity sleeve type hydrostatic/hydrodynamic bearing, which has the high rotation precision and long

time maintenance.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.0025mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.0025mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.003mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.003mm.

工作台为双层结构，最大锥度调整可达5 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 5°.

机床加工精度高，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..  

　　缪颖：首先要产、学、研相结合，建立数控机床研发中心。可以以上海磨床研究所为基础，在国家政策的引导下，大型外圆磨床厂家,高精度外圆磨床，建设全国数控磨床研发中心，促进行业内的企业强强联手，优势互补。进一步促进企业与名牌高校产、学、研相结合，加速高级技术和管理人员的培养，形成中国自主知识产权和专有技术。企业和大专院校、研究院所相结合，我同样认为不仅局限于和国内的院校、院所结合，也可以与国外的院校、院所相结合。例如，上海机床厂有限公司和美国乔治亚洲理工大学就建立了战略合作关系，共同研发数控新产品。

φ200 系列外圆磨床

φ200 Series Cylindrical Grinding Machine Tool

M1320 M1420

MM1320 MM1420

MG1320 MG1420

机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用大锥度套筒式高精度动压轴承主轴系，回转精度高，精度保持时间长。回转精度≤0.001mm。

Spindle of the wheel head uses the dynamic pressure bearing spindle of big-tapered telescope-feed and high-precision, which has the high rotation

precision and long time maintenance.The rotation precision is ≤0.001mm.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.001mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.001mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.001mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.001mm.

工作台为双层结构，最大锥度调整可达9 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 9 °.

机床加工精度高，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..

机床液压驱动采用螺杆泵，运行平稳，噪音低。

The hydraulic drive system uses screw pump which is of smooth running and low noise.

φ320 系列外圆磨床

φ320 Series Cylindrical Grinding Machine Tool

M1332 M1432

MM1332 MM1432

MG1332 MG1432

¾ 机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用大锥度套筒式高精度动压轴承主轴系，回转精度高，精度保持时间长。回转精度≤0.001mm。

Spindle of the wheel head uses the dynamic pressure bearing spindle of big-tapered telescope-feed and high-precision, which has the high rotation

precision and long time maintenance.The rotation precision is ≤0.001mm.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.001mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.001mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.001mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.001mm.

工作台为双层结构，最大锥度调整可达9 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 9 °.

机床加工精度高，大型外圆磨床厂家,精密外圆磨床，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..

机床液压驱动采用螺杆泵，北京广宇大成数控机床有限公司,广宇大成数控机床,运行平稳，大型外圆磨床厂家，噪音低。

The hydraulic drive system uses screw pump which is of smooth running and low noise.

　　此外，去年前十个月我国机床工具产品累计进口同比增加2.1%，最近连续四个月增速均为正增长。数据显示，2012年1～10月，加工中心、磨床、特种加工机床、车床、成形或冲压机床位居各类金属加工机床进口额前五位。其中，加工中心进口4.2万台，价值47.4亿美元，在金属切削机床进口额中占比超过50%，在金属加工机床进口额中占41.3%.金模机床网首席分析师罗百辉认为尽管我国的机床工具行业产值已居世界第一且连续十年呈现高速增长的局面，但整个行业出现的结构性矛盾却越来越突出。 　　发展高端重型数控机床装备。重点发展高精度、高速、高可靠性数控机床，提升产品智能化能力，提高企业智能制造水平。一是发展重型数控机床。依托齐重数控发展数控立车、数控卧车、数控滚齿机、数控立式高速加工中心等产品。依托齐二机床发展数控铣镗、数控龙门铣镗等产品。二是发展轻型高精密数控机床。依托齐重数控发展高精度单柱立式车铣加工中心、高精硬车等产品。依托齐二机床发展高精度数控铣加工中心、高速刨台式镗床等产品。依托宇通公司发展超精密镜面铣磨床、PPS快速平面抛光机、超精密球面车床等产品。三是发展压力机。依托齐二机床转化德国技术，发展汉克多工位压力机。依托一重集团发展大吨位水压机。四是发展专用机床。依托齐二机床发展数控龙门组合铝锭铣床、环焊机等产品。依托华工机床发展重型超精度镜面铣磨数控机床、大型金属表面缺陷综合检测仪等产品。依托齐二机床、齐一机工业品发展数控缠绕机。依托红旭达发展数控相贯线焊机。