φ200 系列外圆磨床

φ200 Series Cylindrical Grinding Machine Tool

M1320 M1420

MM1320 MM1420

MG1320 MG1420

机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用大锥度套筒式高精度动压轴承主轴系，回转精度高，精度保持时间长。回转精度≤0.001mm。

Spindle of the wheel head uses the dynamic pressure bearing spindle of big-tapered telescope-feed and high-precision, which has the high rotation

precision and long time maintenance.The rotation precision is ≤0.001mm.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.001mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.001mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.001mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.001mm.

工作台为双层结构，最大锥度调整可达9 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 9 °.

机床加工精度高，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..

机床液压驱动采用螺杆泵，运行平稳，噪音低。

The hydraulic drive system uses screw pump which is of smooth running and low noise.

导读：众所周知，砂轮是磨削加工中最主要的一类磨具。砂轮是在磨料中加入结合剂，经压坯、干燥和焙烧而制成的多孔体。由于磨料、结合剂及制造工艺不同，砂轮的特性差别很大，因此对磨削的加工质量、生产率和经济性有着重要影响。万贯五金机电网小编为大家介绍砂轮的特性主要是由磨料、力度、结合剂、硬度、组织、形状和尺寸等因素决定。磨床上用砂轮特点是：由于剧烈的磨擦，而使磨削区温度很高。这会造成工件产生应力和变形，甚至造成工件表面烧伤。因此磨削时必须注入大量冷却液，以降低磨削温度。冷却液还可起排屑和润滑作用。 　　记者日前从有关方面了解到,作为广州机床工具行业协会常务副会长企业,广州市敏嘉制造技术有限公司2012年在专用数控磨床行业取得重大突破:敏嘉首次作为责任单位,承担了国家高档数控机床和基础装备重大专项:“弧面凸轮加工工艺研究及弧面凸轮五轴加工中心、弧面凸轮六轴磨削中心”。该项目的目标是研究刀库换刀机构弧面凸轮加工工艺,开发具有自主知识产权的弧面凸轮制造专用设备,满足功能部件企业需求,提升国产刀库设计制造水平。

φ500/φ630/φ800 系列大型外圆磨床

φ500/φ630/φ800Series Large Cylindrical Grinding Machine Tool

M1350 M1450

M1363 M1463

M1380

¾ 机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用高刚性套筒式动静压轴承轴系，回转精度高，精度保持时间长。

Spindle of the wheel head uses the by high rigidity sleeve type hydrostatic/hydrodynamic bearing, which has the high rotation precision and long

time maintenance.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.0025mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.0025mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.003mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.003mm.

工作台为双层结构，最大锥度调整可达5 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 5°.

机床加工精度高，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..  

φ320 系列外圆磨床

φ320 Series Cylindrical Grinding Machine Tool

M1332 M1432

MM1332 MM1432

MG1332 MG1432

¾ 机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用大锥度套筒式高精度动压轴承主轴系，回转精度高，精度保持时间长。回转精度≤0.001mm。

Spindle of the wheel head uses the dynamic pressure bearing spindle of big-tapered telescope-feed and high-precision, which has the high rotation

precision and long time maintenance.The rotation precision is ≤0.001mm.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.001mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.001mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.001mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.001mm.

工作台为双层结构，最大锥度调整可达9 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 9 °.

机床加工精度高，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..

机床液压驱动采用螺杆泵，运行平稳，噪音低。

The hydraulic drive system uses screw pump which is of smooth running and low noise.

　　2.操作者与机床相碰引起的伤害事故。这里包括操作者和机床相互碰撞、操作者撞机床和机床撞操作者三种情况。由于操作方法不当，北京广宇大成数控机床有限公司,广宇大成数控机床,用力过猛，磨床报价,磨床，使用工具规格不合适或已磨损，均可能使操作者撞到机床上。例如，磨床报价,高精度外圆磨床，用规格不合适或已磨损的板手去拧螺帽，并且用力过猛，使扳手打滑离开螺帽，磨床报价,精密外圆磨床，人的身体会因失去平衡而撞在机床上，造成伤害事故。操作者或其他人员所占据的位置不当，也可能受到机床运动部件的撞击，例如，站在平面磨床或牛头刨床运动部件的运动范围内，而注意力又没有集中到机床上，就可能被平面磨床工作台或牛头刨床滑枕撞上。