φ320 系列外圆磨床

φ320 Series Cylindrical Grinding Machine Tool

M1332 M1432

MM1332 MM1432

MG1332 MG1432

¾ 机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用大锥度套筒式高精度动压轴承主轴系，回转精度高，精度保持时间长。回转精度≤0.001mm。

Spindle of the wheel head uses the dynamic pressure bearing spindle of big-tapered telescope-feed and high-precision, which has the high rotation

precision and long time maintenance.The rotation precision is ≤0.001mm.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.001mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.001mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.001mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.001mm.

工作台为双层结构，最大锥度调整可达9 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 9 °.

机床加工精度高，磨床多少钱,精密外圆磨床，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..

机床液压驱动采用螺杆泵，运行平稳，噪音低。

The hydraulic drive system uses screw pump which is of smooth running and low noise.

φ200 系列外圆磨床

φ200 Series Cylindrical Grinding Machine Tool

M1320 M1420

MM1320 MM1420

MG1320 MG1420

机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用大锥度套筒式高精度动压轴承主轴系，回转精度高，北京广宇大成数控机床有限公司,广宇大成数控机床,精度保持时间长。回转精度≤0.001mm。

Spindle of the wheel head uses the dynamic pressure bearing spindle of big-tapered telescope-feed and high-precision, which has the high rotation

precision and long time maintenance.The rotation precision is ≤0.001mm.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.001mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.001mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.001mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.001mm.

工作台为双层结构，最大锥度调整可达9 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 9 °.

机床加工精度高，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..

机床液压驱动采用螺杆泵，运行平稳，噪音低。

The hydraulic drive system uses screw pump which is of smooth running and low noise.

　　“我国企业需要抓住良好的发展机遇，加强自主创新，提高技术水平和产业化规模，积极开拓新兴市场，以应对未来的市场竞争。”罗百辉指出，目前我国航空航天、汽车模具工业急需的高档数控机床设备有：高速加工中心、多轴联动加工中心、双主轴车削中心和车铣中心、精密磨床和复合磨床、精密电加工机床、精密大型龙头镗铣床和精密落地镗铣床、高效数控专机等，而这些设备国内企业还不能很好满足，产业化水平尚待提高。必须在尽快提高数控机床产品自主开发的基础上，加强国际合作，提高高档数控机床和成套的供货水平。

φ500/φ630/φ800 系列大型外圆磨床

φ500/φ630/φ800Series Large Cylindrical Grinding Machine Tool

M1350 M1450

M1363 M1463

M1380

¾ 机床性能结构特点 Features of the machine tool performance and structure

砂轮架主轴采用高刚性套筒式动静压轴承轴系，回转精度高，精度保持时间长。

Spindle of the wheel head uses the by high rigidity sleeve type hydrostatic/hydrodynamic bearing, which has the high rotation precision and long

time maintenance.

砂轮进给机构采用齿轮结构，操作灵活准确。最小进给量为0.0025mm。

Grinding wheel feed mechanism uses gear structure, which is flexible and accurate to operate. Minimum feed amount is 0.0025mm.

头架旋转采用交流变频无极调速，调速灵活方便。

Headstock rotation controlled by stepless AC frequency conversion, it is flexible to regulate the speed.

万能型机床头架回转主轴采用高精度进口滚动轴承。从高速到低速均可保持高精度、高刚性运转。主轴回转精度≤0.003mm。

The rotary spindle of the universal type machine’s headstock uses imported high-precision rolling bearings. From high speed to low speed, the

high-precision and high-rigidity operation can be maintained. Spindle rotation precision is ≤0.003mm.

工作台为双层结构，最大锥度调整可达5 °。

The workbench is double-deck structure; the maximum taper adjustment can be up to 5°.

机床加工精度高，整体布局合理，造型美观，操作手柄集中、形象、操作简便、安全。

With high machining precision,theintegral layout of machine tool is rational, appearance is attractive, operating handles are centralized arrange

and visualization, thus to make the machine easy to control and safe to operate.

进给导轨使用贴塑导轨，提高了慢速运行平稳性及抗振性。

The feeding guideway uses antifriction & plastic-filming guideway,thus promoting the smoothness and vibration resistance of low-speed operations..  

　　实施创新驱动发展战略，以用户需求为先导，利用产学研用一体化优势，加大对高精高效螺纹加工技术、异形螺纹加工装备的改进及工艺研究，提高机床产品的性能和可靠性。具体抓好SK7712、SK6505数控蜗杆磨床、铣床、SKR7620内螺纹磨削中心、SK725数控丝锥磨床、重大专项试验台等产品制造和升级改造工作，在关键技术、核心技术上全力实现新突破；抓好科技重大专项课题攻关任务，组织好2009zx04001171、2010zx04001162课题验收工作，对已研发成功的专项成果产品，加快整改完善，磨床多少钱,数控外圆磨床，努力实现专项产品的商品化和产业化，将科技成果转化为经济效益。 　　江苏华雕机械有限公司是集科研、技术开发、制造为一体的高科技公司。公司拥有各类先进的电主轴及各类变频电机定、转子的设计和制造技术。全部采用了目前国际上最新的材料、最先进的技术对公司的产品进行设计和制造，磨床多少钱，完全按照ISO9001国际质量管理体系的标准对生产的全过程进行质量控制。公司已开发和生产有四大系列百余种产品供市场选用，主要适用于高速数控加工中心、高速数控雕铣、高速数控钻铣、高速数控精密磨床、高速木工镂铣及其它高速数控机械。